Essentials Dumps PDF 2023 Program Your Preparation EXAM SUCCESS
Get Perfect Results with Premium Essentials Dumps Updated 75 Questions
WatchGuard Essentials (Fireware Essentials) Exam is a certification program that is designed to test and validate the skills and knowledge of network security professionals. Essentials exam is specifically created for IT professionals who have experience in configuring and managing WatchGuard Firebox security appliances. Essentials exam is designed to test the candidate's ability to manage, monitor, and maintain WatchGuard Firebox security systems.
WatchGuard Essentials (Fireware Essentials) Exam is a certification exam designed to test the knowledge and skills of IT professionals in managing WatchGuard security solutions. Essentials exam is intended for network administrators, security professionals, and IT consultants who are responsible for managing WatchGuard firewalls and security appliances. It covers a range of topics, including network security, VPNs, authentication, web filtering, and intrusion prevention.
NEW QUESTION # 16
While troubleshooting a branch office VPN tunnel, you see this log message:
2 014-07-23 12:29:15 iked (203.0.113.10<->203.0.113.20) Peer proposes phase one encryption 3DES, expecting AES
What settings could you modify in the local device configuration to resolve this issue? (Select one.)
- A. BOVPN Tunnel Route settings
- B. BOVPN Tunnel settings
- C. BOVPN-Allow policies
- D. BOVPN Gateway settings
Answer: D
Explanation:
Explanation/Reference:
The WatchGuard BOVPN settings error in this example states phase one encryption. Only the BOVPN Gateway settings can specify phase one settings. BOVPN Tunnel settings specify phase 2 settings.
NEW QUESTION # 17
After you enable spamBlocker, your users experience no reduction in the amount of spam they receive. What could explain this? (Select three.)
- A. A spamBlocker exception is configured to allow traffic from sender *.
- B. Connections cannot be resolved to the spamBlocker servers because DNS is not configured on the Firebox.
- C. The Maximum File Size to Scan option is set too high.
- D. spamBlocker Virus Outbreak Detection is not enabled.
- E. The spamBlocker action for Confirmed Spam is set to Allow.
Answer: A,B,E
Explanation:
Explanation/Reference:
A: Spamblocker requires DNS to be configured on your XTM device
B: If you use spamBlocker with the POP3 proxy, you have only two actions to choose from: Add Subject Tag and Allow. Allow lets spam email messages go through the Firebox without a tag.
D: The Firebox might sometimes identify a message as spam when it is not spam. If you know the address of the sender, you can configure the Firebox with an exception that tells it not to examine messages from that source address or domain.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, page 138
NEW QUESTION # 18
In a Mobile VPN configuration, why would you choose default route VPN over split tunnel VPN? (Select one.)
- A. Default route VPN automatically allows dynamic NAT
- B. Default route VPN uses less bandwidth
- C. Default route VPN allows your Firebox to examine all remote user traffic
- D. Default route VPN uses less processing power
Answer: A
NEW QUESTION # 19
You can use Firebox-DB authentication with any type of Mobile VPN.
- A. False
- B. True
Answer: A
NEW QUESTION # 20
Match each WatchGuard Subscription Service with its function.
A repository where email messages can be sent based on analysis by spamBlocker, Gateway AntiVirus, or Data Loss Prevention. (Choose one).
- A. Spam Blocker
- B. Data Loss Prevention DLP
- C. Gateway / Antivirus
- D. Quarantine Server
- E. Intrusion Prevention Server IPS
Answer: D
Explanation:
The WatchGuard Quarantine Server provides a safe mechanism to quarantine any email messages that are suspected or known to be spam, or to contain viruses or sensitive data. The QuarantineServer is a repository for email messages that the SMTP proxy sends to quarantine based on analysis by spamBlocker, Gateway AntiVirus, or Data Loss Prevention.
Reference:https://www.watchguard.com/help/docs/webui/xtm_11/en-US/index.html#cshid=en-US/quarantineserver/quar_server_about_c.html
NEW QUESTION # 21
Only 50 clients on the trusted network of your Firebox can connect to the Internet at the same time. What could cause this? (Select one.)
- A. TheLiveSecurity feature key is expired.
- B. The device feature key allows a maximum of 50 client connections.
- C. The DHCP address pool on the trusted interface has only 50 IP addresses.
- D. The Outgoing policy allows a maximum of 50 client connections.
Answer: C
NEW QUESTION # 22
Which tool can add an IP address for the Firebox to permanently block? (Select one)
- A. Log Server
- B. FireBox System Manager - Blocked Sites list
- C. FireWatch
- D. Firebox System Manager - Subscription services
- E. Traffic Monitor
- F. Firebox System Manager - Authentication list
Answer: B
Explanation:
Explanation/Reference:
Block a site permanently
The Successful Company network administrator has been driven to distraction recently by a script kiddy using addresses in the 192.136.15.0/24 network to run probes of the Successful network. In this exercise, we permanently block all connections from that network.
1. From Policy Manager, select Setup > Default Threat Protection > Blocked Sites.
The Blocked Sites Configuration dialog box opens.
2. On the Blocked Sites tab, click Add.
3. The Add Site dialog box opens. 3. Use the Choose Type drop-down list to select Network IP. In the Value text box, type 192.136.15.0/ 24.
4. Click OK.
The entry appears in the Blocked Sites list. With this configuration, the Firebox blocks all packets to and from the 192.136.15.0/24 network range.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, pages 15, 34, 59, 181
NEW QUESTION # 23
Which of these threats can the Firebox prevent with the default packet handling settings? (Select four.)
- A. Viruses in email messages
- B. Malware in downloaded files
- C. Access to inappropriate websites
- D. IP spoofing
- E. Port scans
- F. Flood attacks
- G. Denial of service attacks
Answer: D,E,F,G
Explanation:
B:The default configuration of the XTM device is to block DDoS attacks.
C: In a flood attack, attackers send a very high volume of traffic to a system so it cannot examine and allow permitted network traffic. For example, an ICMP flood attack occurs when a system receives too many ICMP ping commands and must use all of its resources to send reply commands. The XTM device can protect against these types of flood attacks: IPSec, IKE, ICMP. SYN, and UDP.
E: When the Block Port Space Probes (port scans) and Block Address Space Probes check boxes are selected, all incoming traffic on all interfaces is examined by the XTM device.
CG: Default packet handling can reject a packet that could be a security risk, including packets that could be part of a spoofing attack or SYN flood attack
Reference:http://www.watchguard.com/help/docs/wsm/xtm_11/en-US/index.html#en-US/intrusionprevention/default_pkt_handling_opt_about_c.html%3FTocPath%3DDefault%2520Thr eat%2520Protection%7CAbout%2520Default%2520Packet%2520Handling%2520Options%7C__ ___0
NEW QUESTION # 24
When your device is in a default state, to which interface do you connect your management computer so you can use the Quick Setup Wizard or Web Setup Wizard to configure the device? (Select one.)
- A. Console interface
- B. Interface 0
- C. Interface 1
- D. Any interface
Answer: C
Explanation:
To start the Web Setup Wizard, connect your computer to interface number 1 of your XTMdevice with an Ethernet cable. This is the trusted interface.
Reference:http://www.watchguard.com/help/docs/wsm/xtm_11/en-US/index.html#en-US/installation/qsw_web_about_c.html
NEW QUESTION # 25
Which tool is used to see a treemap visualization of the traffic through your Firebox? (Select one)
- A. FireWatch
- B. Log Server
- C. Firebox System Manager - Subscription services
- D. Traffic Monitor
- E. FireBox System Manager - Blocked Sites list
- F. Firebox System Manager - Authentication list
Answer: A
Explanation:
Explanation/Reference:
The FireWatch page is separated into tabs of data that is presented in a Treemap Visualization. The treemap is a widget that proportionally sizes blocks in the display to represent the data for that tab. The largest blocks on the tab represent the largest data users. The data is sorted by the tab you select and the type you select from the drop-down list at the top right of the page.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, pages 15, 34, 59, 181
NEW QUESTION # 26
HOTSPOT
Match the monitoring tool to the correct task:
Answer:
Explanation:
Explanation:
Firewatch Traffic Monitor Firebox system Manager - Authentication List Log Server Firbox System Manager - Blocked State List Firebox System Manager - Subscription Services
NEW QUESTION # 27
Match each WatchGuard Subscription Service with its function.
Manages use of applications on your network. (Choose one).
- A. APT Blocker
- B. Data Loss Prevention DLP
- C. Application Control
- D. Reputation Enable Defense RED
- E. Intrusion Prevention Server IPS
Answer: C
Explanation:
Application Control keeps unproductive,inappropriate, and dangerous applications off-limits.
Stay on top of the applications running on your network for tight security and high productivity with a subscription to WatchGuard Application Control. It allows you to establish which applications canbe used within your organization, by whom, and when.
Reference:http://www.watchguard.com/docs/brochure/wg_application-control_ds.pdf
NEW QUESTION # 28
Match the monitoring tool to the correct task.
Which is not a Fireware monitoring tool? (Select one)
- A. Log Server
- B. FireWatch
- C. Firebox System Manager - Subscription services
- D. Traffic Monitor
- E. FireBox System Manager - Blocked Sites list
- F. Firebox System Manager - Authentication list
Answer: A
Explanation:
The Fireware monitor and configuration tools are: Edge Web Manager, Firebox System Manager, HostWatch, and Ping.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, pages 15, 34, 59,
NEW QUESTION # 29
Match each type of NAT with the correct description:
Changes and routes all incoming and outgoing packets sent from one range of addresses to a different range of addresses. (Choose one)
- A. 1-to1 NAT
- B. Dynamic NAT
- C. NAT Loopback
Answer: A
Explanation:
Explanation/Reference:
When you enable 1-to-1 NAT, the Firebox changes and routes all incoming and outgoing packets sent from one range of addresses to a different range of addresses.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, page 74
NEW QUESTION # 30
An email newsletter about sales from an external company is sometimes blocked by spamBlocker. What option could you choose to make sure the newsletter is delivered to your users? (Select one.)
- A. Set the spamBlocker action to quarantine the email for later retrieval.
- B. Set the spamBlocker virus outbreak detection action to allow emails from the newsletter source.
- C. Add a spamBlocker subject tag for bulk email messages.
- D. Add a spamBlocker exception based on the From field of the newsletter email.
Answer: C
NEW QUESTION # 31
Match the monitoring tool to the correct task.
Which tool can ping the source of a denied packet? (Select one)
- A. FireboxSystem Manager - Subscription services
- B. Log Server
- C. FireWatch
- D. Traffic Monitor
- E. FireBox System Manager - Blocked Sites list
- F. Firebox System Manager - Authentication list
Answer: D
Explanation:
For a quick look at the log messages generated by the Firebox, use Traffic Monitor. With Traffic Monitor, you can apply color to differenttypes of messages, and ping or traceroute to the IP addresses of computers included in the log messages.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, pages 15, 34, 59, 181
NEW QUESTION # 32
HOTSPOT
Match each type of NAT with the correct description:
Answer:
Explanation:
Explanation:
NAT Loopback 1-to 1 NAT
Dynamic NAT
NEW QUESTION # 33
You can use Firebox-DB authentication with any type of Mobile VPN.
- A. False
- B. True
Answer: B
Explanation:
http://www.watchguard.com/help/docs/fireware/11/en-US/Content/en-US/mvpn/general/mobile_vpn_types_c.html
NEW QUESTION # 34
What is one reason that users could see a certificate warning in their web browsers when they connect to Fireware XTM Web UI? (Select one.)
- A. The user has been previously added to the Blocked Sites list.
- B. The user or group is not present in the Firebox User database.
- C. The authentication server does not respond after three minutes.
- D. The Firebox or XTM device uses the default self-signed certificate.
Answer: D
NEW QUESTION # 35
From the Fireware Web UI, you can generate a report that shows your device configuration settings.
- A. False
- B. True
Answer: B
NEW QUESTION # 36
The policies in a default Firebox configuration do not allow outgoing traffic from optional interfaces.
- A. False
- B. True
Answer: A
NEW QUESTION # 37
......
WatchGuard Essentials (Fireware Essentials) Certification Exam is an online exam that can be taken from anywhere in the world. Essentials exam is timed and consists of multiple-choice and scenario-based questions. Essentials exam is designed to be challenging and comprehensive, ensuring that those who pass the exam have a deep understanding of WatchGuard Firebox devices.
Essentials PDF Dumps Extremely Quick Way Of Preparation: https://freedumps.testpdf.com/Essentials-practice-test.html
