Download HQT-6714 Exam Dumps Questions to get 100% Success in Hitachi
100% Accurate Answers! HQT-6714 Actual Real Exam Questions
NEW QUESTION # 36
What is a key benefit of utilizing a 3DC configuration in a Hitachi Universal Replicator setup?
- A. Allows for real-time analytics of replication traffic
- B. Enhances redundancy and facilitates disaster recovery planning
- C. Simplifies the configuration of journal volumes
- D. Reduces the need for manual intervention during replication
Answer: B
NEW QUESTION # 37
To monitor the replication process, which component must be configured using the Command Control Interface?
- A. Secondary volumes
- B. Primary volumes
- C. Journal groups
- D. horcm files
Answer: C
NEW QUESTION # 38
Which feature does Hitachi Ops Center Protector offer to manage replication traffic efficiently?
- A. QoS bandwidth throttling
- B. Dynamic routing of replication data
- C. Automated load balancing across links
- D. Real-time traffic encryption
Answer: A
NEW QUESTION # 39
What would be a critical first step when noticing an anomaly in replication data throughput?
- A. Modifying the network configuration settings
- B. Rebooting the primary storage system
- C. Recreating all replication pairs
- D. Checking the replication logs for errors
Answer: D
NEW QUESTION # 40
The _______ command is used to verify the status of the replication pairs in the Command Control Interface.
- A. pairdisplay
- B. pairverify
- C. paircheck
- D. pairstatus
Answer: A
NEW QUESTION # 41
Which component in a Hitachi Universal Replicator setup stores a copy of the write operations pending synchronization?
- A. Journal volume
- B. Command device
- C. Secondary volume
- D. Buffer volume
Answer: A
NEW QUESTION # 42
The 'pairchk' command in the Command Control Interface is used to ________.
- A. Synchronize replication pairs with the primary site
- B. Create new replication pairs
- C. Delete replication pairs
- D. Check the health and connectivity of replication pairs
Answer: D
NEW QUESTION # 43
How does an unexpected shutdown of the primary storage system affect Hitachi Universal Replicator?
- A. It triggers automatic failover to the secondary system.
- B. It causes data loss if not properly journaled.
- C. It pauses replication until the primary system is restarted.
- D. It deletes all replication pairs automatically.
Answer: C
NEW QUESTION # 44
What are the prerequisites for configuring Hitachi Universal Replicator? (Choose two)
- A. Creating journal volumes
- B. Setting up replication pairs in CCI
- C. Establishing consistent group policies
- D. Configuring RAID groups
Answer: A,B
NEW QUESTION # 45
What is the primary function of Hitachi Ops Center Protector in managing Hitachi Universal Replicator?
- A. To provide a command-line interface for replication management
- B. To automate the creation and management of replication pairs
- C. To configure network settings on storage arrays
- D. To update firmware on storage devices
Answer: B
NEW QUESTION # 46
Which elements are essential to configure on both the primary and secondary sites when setting up Hitachi Universal Replicator? (Choose two)
- A. Identical network equipment
- B. The same volume size
- C. The same operating system
- D. Similar CPU architectures
Answer: B,C
NEW QUESTION # 47
The critical component that helps Hitachi Universal Replicator minimize performance impact on primary storage during peak load times is ________.
- A. System load-based throttling
- B. Snapshot technology
- C. Data deduplication
- D. Network segmentation
Answer: A
NEW QUESTION # 48
What is the role of "Consistency Groups" in Hitachi Ops Center Protector?
- A. They organize users into groups based on their access levels
- B. They ensure all related volumes are replicated at the same logical point in time
- C. They provide consistent throughput for all replicated data
- D. They manage batch processing of replication commands
Answer: B
NEW QUESTION # 49
Select the key operational benefits of using Hitachi Universal Replicator for disaster recovery scenarios. (Choose Two)
- A. Enhanced data deduplication
- B. Lower recovery time objectives (RTO)
- C. Reduced recovery point objectives (RPO)
- D. Automated storage tiering
- E. Geo-clustering capabilities
Answer: B,C
NEW QUESTION # 50
When a performance degradation occurs in Hitachi Universal Replicator, what CLI command can be used to check the status of replication pairs?
- A. paircreate
- B. pairdisplay
- C. pairresync
- D. pairsplit
Answer: B
NEW QUESTION # 51
Which functionality does Hitachi Ops Center Protector provide to recover from a disaster recovery scenario?
- A. Instant recovery using cached data
- B. Automated failover to secondary site
- C. Only alerts the administrator to initiate recovery
- D. Manual intervention to switch to the secondary site
Answer: B
NEW QUESTION # 52
In the context of 3DC operations with Global-Active Device, what is the primary advantage of asynchronous replication to the third site?
- A. It reduces the cost of replication.
- B. It provides higher data availability and disaster recovery.
- C. It increases the performance of the primary site.
- D. It simplifies network configuration.
Answer: B
NEW QUESTION # 53
What feature of Hitachi Universal Replicator is most beneficial for managing data consistency across three data centers?
- A. Automated failover and failback mechanisms
- B. The use of high-speed disk arrays
- C. Consistency groups across sites
- D. The ability to prioritize data writes
Answer: C
NEW QUESTION # 54
Which of the following performance considerations is critical when configuring Hitachi Universal Replicator for optimal operation?
- A. Network bandwidth and latency
- B. Encryption speed
- C. CPU utilization on the storage array
- D. Disk I/O operations per second
Answer: A
NEW QUESTION # 55
In what scenario is Hitachi Universal Replicator most beneficial for enterprise data replication?
- A. When the replication window is small and requires high throughput
- B. When data volume is low but requires high availability
- C. When the primary and secondary sites are geographically distant
- D. When all data must be encrypted before replication
Answer: C
NEW QUESTION # 56
To monitor the replication process, the administrator must configure _______ using the Command Control Interface.
- A. journal groups
- B. secondary volumes
- C. primary volumes
- D. horcm files
Answer: D
NEW QUESTION # 57
Which component ensures data consistency during replication in Hitachi Universal Replicator?
- A. Virtual LUNs
- B. Data checkpoints
- C. Consistency groups
- D. Storage pools
Answer: C
NEW QUESTION # 58
Which of the following is a prerequisite for configuring Hitachi Ops Center Protector with Universal Replicator?
- A. Defining the network topology in the Ops Center
- B. Establishing a VPN tunnel between sites
- C. Installing Command Control Interface software on all client machines
- D. Setting up replication groups and pairs in Ops Center
Answer: D
NEW QUESTION # 59
What feature does Hitachi Ops Center Protector offer to manage replication traffic efficiently?
- A. QoS bandwidth throttling
- B. Dynamic routing of replication data
- C. Automated load balancing across links
- D. Real-time traffic encryption
Answer: A
NEW QUESTION # 60
When troubleshooting Hitachi Universal Replicator, the first log to check for replication failures is the ________ log.
- A. System error
- B. Replication event
- C. Operation management
- D. Journal
Answer: B
NEW QUESTION # 61
......
Best Value Available! Realistic Verified Free HQT-6714 Exam Questions: https://freedumps.testpdf.com/HQT-6714-practice-test.html
