[2026] 1Z0-1054-26 All-in-One Exam Guide Practice To your 1Z0-1054-26 Exam!
Preparations of 1Z0-1054-26 Exam 2026 Oracle Cloud Unlimited 145 Questions
NEW QUESTION # 54
You notice that a lot of erroneous address data is being saved. How do you ensure that only valid addresses are entered in the system?
- A. Define the Geography Validation for Country option to No Validation.
- B. Redefine the geography hierarchy.
- C. Define the Geography Validation for Country option to Error.
- D. Redefine the location structure.
Answer: C
Explanation:
Geography validation is a feature that enables you to validate the address information entered for a location against the geography hierarchy defined for a country. You can set the Geography Validation for Country option to one of the following values:
No Validation: No validation is performed on the address information.
Warning: A warning message is displayed if the address information does not match the geography hierarchy, but the user can still save the address.
Error: An error message is displayed if the address information does not match the geography hierarchy, and the user cannot save the address until the error is corrected. To ensure that only valid addresses are entered in the system, you should set the Geography Validation for Country option to Error. This will prevent users from saving erroneous address data and enforce data quality and accuracy. References:
Oracle Financials Cloud: Enterprise Structures with General Ledger Implementation, Chapter 2: Define Geographies, Section: Geography Validation Oracle Financials Cloud: Implementing Enterprise Structures and General Ledger, Chapter 2: Define Geographies, Section: Geography Validation
NEW QUESTION # 55
You have enabled budgetary control and have a control budget set toAdvisorycontrol level. For September
2016, your budget for a given account combination is$5,000 USD.
In the same month, there is anapproved requisitionfor that account of$900and anapproved purchase orderfor that account of$2,500 USD. There is also aGeneral Ledger adjustment journal entryfor that account of$1,600 USD. Anapproved purchase order line of $400 USDis thencanceled.
Aninvoice is matchedto the purchase order for$2,100 USD.
Which two statements are true? (Choose two.)
- A. Purchase order encumbrance will be released for $2,100 USD.
- B. Funds reservation only happens for non-matched invoices, so the system will not reserve funds.
- C. As there are cancellations for $400 USD, the system will partially reserve the funds in September 2016 and fully reserve it in October 2016.
- D. The system always consumes the budget of future periods if the limit for the current period is expired, so October 2016 budget will be considered for reservation.
Answer: A,C
NEW QUESTION # 56
What is the role of the OTBI Reporting tool in Oracle Cloud Financial Reporting?
- A. It allows users to generate ad hoc reports, analyze financial data, and create user-defined analytics directly from the transaction tables.
- B. It allows users to design boardroom-ready financial statements, ensuring compliance with regulatory accounting standards.
- C. It allows users to perform spreadsheet-based multidimensional analysis from Microsoft Excel.
- D. It allows users to create, manage, and deliver high-fidelity, pixel-perfect reports and documents that can be scheduled to run at specific intervals.
Answer: A
Explanation:
OTBI, or Oracle Transactional Business Intelligence, is designed for real-time operational and ad hoc analysis using transactional subject areas. In Financials, users can create analyses, dashboards, prompts, and user-defined analytics directly from transaction data. This is different from Financial Reporting Web Studio, which is used for boardroom-quality financial statements based on balances cubes. It is also different from BI Publisher, which is used for formatted, pixel-perfect reports and scheduled document output. Spreadsheet-based multidimensional analysis is the role of Smart View.
Therefore, the correct OTBI description is ad hoc reporting and transactional analysis. Oracle documentation describes OTBI as supporting analyses against transactional data, including financial subject areas such as General Ledger and Intercompany.
NEW QUESTION # 57
Manage Chart of Accounts Structure and Instance
Scenario
Your client is implementing Oracle Fusion Cloud Financials. The decision is to have a 5-segment Chart of Accounts: Company, Cost Center, Account, Product, and Intercompany. You are working in the General Ledger team and will be responsible for creating the Chart of Accounts Structure and Instance for the Chart of Accounts.
Task 1
Create a Chart of Accounts Structure and Instance for the following Chart of Accounts:
Note:
Prefix all your setups with 07, where 07 is your candidate ID
There is one balancing segment.
Choose the appropriate segment labels.
. For the purpose of this test there is no need to deploy the flexfield.
. Valid code combinations should be added to the Code Combination table automatically.
Shorthand aliases will not be implemented.
. Accept the defaults for the instance segments.
Answer:
Explanation:
See the Explanation for the complete Solution.
Explanation:
Here are the steps you need to follow:
Navigate to the Setup and Maintenance work area and search for the task Manage Chart of Accounts Structures.
Click on the Create icon to create a new Chart of Accounts Structure. Enter the following information:
Structure Code: 07COA
Structure Name: 07 Chart of Accounts
Description: Chart of Accounts for candidate 07
Number of Segments: 5
Click on the Next button to define the segments. Enter the following information for each segment:
Segment Number: 1
Segment Name: Company
Value Set Code: 07Corporate Company
Value Set Name: 07 Corporate Company
Maximum Size: 3
Balancing: Yes
Segment Label: Company
Segment Number: 2
Segment Name: Cost Center
Value Set Code: 07Corporate Cost Center
Value Set Name: 07 Corporate Cost Center
Maximum Size: 4
Balancing: No
Segment Label: Cost Center
Segment Number: 3
Segment Name: Account
Value Set Code: 07Corporate Account
Value Set Name: 07 Corporate Account
Maximum Size: 8
Balancing: No
Segment Label: Natural Account
Segment Number: 4
Segment Name: Product
Value Set Code: 07Corporate Product
Value Set Name: 07 Corporate Product
Maximum Size: 3
Balancing: No
Segment Label: Product
Segment Number: 5
Segment Name: Intercompany
Value Set Code: 07Corporate Company
Value Set Name: 07 Corporate Company
Maximum Size: 3
Balancing: No
Segment Label: Intercompany
Click on the Next button to review the summary and click on the Save and Close button to save the Chart of Accounts Structure.
Navigate to the Setup and Maintenance work area and search for the task Manage Chart of Accounts Structure Instances.
Click on the Create icon to create a new Chart of Accounts Structure Instance. Enter the following information:
Structure Code: 07COA
Structure Name: 07 Chart of Accounts
Description: Chart of Accounts for candidate 07
Chart of Accounts Structure: 07COA
Enabled: Yes
Allow Dynamic Inserts: Yes
Click on the Next button to review the summary and click on the Save and Close button to save the Chart of Accounts Structure Instance.
You have successfully created a Chart of Accounts Structure and Instance for the given scenario. For more information, you can refer to the following resources:
Chart of Accounts Structures and Instances
Chart of Accounts Components
Minimum Steps For Financial Enterprise Structures Configuration
Overview of Creating and Configuring Chart of Accounts Structure and Instances
NEW QUESTION # 58
When creating your financial statements, you want a chart such as a bar graph to be included in the report output. Which two reporting tools allow you to achieve this?
- A. Financial Reporting Studio
- B. Smart View
- C. Account Inspector
- D. Financial Statement Generator
Answer: A,B
Explanation:
Smart View and Financial Reporting Studio are two reporting tools that allow you to create and include charts such as bar graphs in your financial statements. Smart View is a multidimensional pivot analysis tool that enables you to interactively analyze your balances and define reports using a familiar spreadsheet environment. You can also insert charts and graphs to visualize your data. Financial Reporting Studio is a tool that lets you design and format financial reports using data from the Oracle General Ledger balances cube. You can also add charts and graphs to enhance your reports and display data trends.Reference:
Overview of Financial Reporting Center, Oracle Cloud Applications Financials 23B, https://docs.oracle.com/en/cloud/saas/financials/23b/faiah/overview-of-financial-reporting-center.html Using Smart View with Oracle Financials Cloud, Oracle Cloud Applications Financials 23B, https://docs.oracle.com/en/cloud/saas/financials/23b/fasvf/using-smart-view-with-oracle-financials-cloud.html Creating Financial Reports, Oracle Cloud Applications Financials 23B, https://docs.oracle.com/en/cloud/saas/financials/23b/farug/creating-financial-reports.html
NEW QUESTION # 59
Which two statements are true about infotiles and infolets?
- A. Infolets are accessed only from the News Feed home page layout.
- B. You can create your own user-defined infolets.
- C. Infotiles have Front view. Back view, and Expanded view.
- D. Infotiles pull data from a Smart View analysis.
- E. You can refresh infolets to see up-to-date data.
Answer: C,E
Explanation:
Infotiles and infolets are graphical components that display key information and metrics on the General Accounting dashboard. They help users access many sources of information across the enterprise in an efficient, timely, and engaging manner. Infolets can be refreshed to see up-to-date data by clicking the Refresh icon on the infolet. Infotiles have three views: Front view, which shows a summary of the most important information; Back view, which shows additional details and actions; and Expanded view, which shows a full-screen view of the infotile content. References:
Oracle Financials Cloud: Using General Ledger, Chapter 6: Financial Reporting and Analysis, Section:
General Accounting Infolets
Oracle Financials Cloud: Implement General Ledger, Chapter 1: Overview of Oracle Financials Cloud, Section: Overview of Using Infolets to Identify Issues and Prioritize Tasks
NEW QUESTION # 60
Which two statements are true if a journal description rule is defined with sources?
- A. You cannot assign journal description rules to sources.
- B. The description rule can only be assigned to the header or line level.
- C. The description rule can only be assigned to the journal line level.
- D. The description rule may be assigned to either the header or line level, or to both.
- E. The sources must also be assigned to the accounting event class that is assigned to the journal entry rule set.
Answer: D,E
NEW QUESTION # 61
SIMULATION
Challenge 2
Manage Shorthand Aliases
Scenario
Your client intends to utilize the Shorthand Alias feature and would like to see how the aliases will appear when entering transactions.
Task 2
Create a shorthand alias for the US Chart of Accounts to record Revenue Domestic for Supremo Fitness, Line of Business 2, and US Operations Cost Center.
Note: . Prefix your alias name with 07, where 07 is your exam ID. . There is no Product or Intercompany impact.
Answer:
Explanation:
See the Explanation for the complete Solution
Explanation:
Here are the steps you need to follow:
In the Setup and Maintenance work area, go to the following:
Offering: Financials
Functional Area: Financial Reporting Structures
Task: Manage Shorthand Aliases
Select the chart of accounts that you want to create the alias for. In this case, it is the Corporate chart of accounts.
Click on the Add Row icon to create a new alias. Enter the following information:
Alias Name: RevDom
Account Template: 101-2000-400000-000-000-000
Description: Revenue Domestic for Supremo Fitness, Line of Business 2, and US Operations Cost Center Enabled: Yes Start Date: Today's date End Date: Blank Click on the Save and Close button to save the alias.
You have successfully created a shorthand alias for the US Chart of Accounts. For more information, you can refer to the following resources:
Account Aliases
Enter a GL Account Alias
Short Hand Alias in Fusion Financials Key Flexfield
How to Enable Account Shorthand Aliases
NEW QUESTION # 62
Which three factors should you consider while specifying Intercompany System options?
- A. Whether to allow receivers to reject intercompany transactions
- B. Automatic or manual batch numbering and the minimum transaction amount
- C. Automatic or manual batch numbering and the maximum transaction amount
- D. Whether to enforce an enterprise-wide currency or allow intercompany transactions in local currencies
- E. Approvers who will approve intercompany transactions
Answer: A,B,D
Explanation:
Intercompany System options are used to set up intercompany processing rules at the enterprise level, based on your specific business needs. They help you standardize and simplify transaction processing, minimize disputes, and reduce administrative costs. The three factors that you should consider while specifying Intercompany System options are:
Automatic or manual batch numbering and the minimum transaction amount: These options help you control the numbering and the size of intercompany transactions. You can choose to use system generated or manual batch numbering, and you can specify a minimum threshold amount for intercompany transactions to prevent immaterial transactions. To use the minimum transaction amount option, you must also select an Intercompany currency option.
Whether to enforce an enterprise-wide currency or allow intercompany transactions in local currencies: This option helps you manage the currency risk and the conversion rate fluctuations for intercompany transactions. You can choose to standardize transaction processing by selecting an Intercompany currency, which means that all intercompany transactions created in the Intercompany module are entered in this currency. Alternatively, you can choose to allow intercompany transactions in local currencies, which means that intercompany transactions can be entered in the ledger currency of the sender or the receiver.
Whether to allow receivers to reject intercompany transactions: This option helps you handle the approval and dispute resolution process for intercompany transactions. You can choose to allow receivers to reject intercompany transactions if they disagree with the sender's information, such as the amount, the account, or the date. If you enable this option, you must also specify the rejection reason and the notification details for the sender.
:
Intercompany System Options
Implementing Enterprise Structures and General Ledger
Implement General Ledger
NEW QUESTION # 63
Your current Oracle Fusion Cloud implementation project includes the configuration of multiple ledgers per country and the setting up of accounting automation to drive journal processing efficiencies. In a particular country (which has a primary, secondary, and multiple reporting currency ledgers), there is a requirement to exclude the country's journal processing from accounting automation.
If you enter a ledger set (including all ledgers for that country) on the Exclusion tab of Manage Accounting Automation, what is removed from accounting automation processing?
- A. The primary and reporting ledgers only
- B. The secondary and reporting currency ledgers only
- C. The primary, secondary, and reporting currency ledgers
- D. Just the primary ledger
Answer: C
NEW QUESTION # 64
Your customer uses Financials Cloud, Projects, Inventory, and SCM.
Which two statements are true regarding intercompany accounting for these products? (Choose two.)
- A. In Financials Cloud, Intercompany Balancing Rules are used to balance both cross-ledger allocation journals and single-ledger journals.
- B. Intercompany Balancing Rules are defined centrally and applied across Financials and Projects.
- C. Intercompany balancing rules in General Ledger need to be mapped with the intercompany configuration in each product.
- D. Each product has its own Intercompany Accounting feature that needs to be configured separately.
Answer: B,D
Explanation:
According to Oracle documentation1, the following statements are true regarding intercompany accounting for Financials Cloud, Projects, Inventory, and SCM: Each product has its own Intercompany Accounting feature that needs to be configured separately, and Intercompany Balancing Rules are defined centrally and applied across Financials and Projects. Intercompany accounting is the process of recording transactions between related entities within an enterprise or between groups in the same legal entity. Each product has its own Intercompany Accounting feature that enables you to create, process, and reconcile intercompany transactions. Intercompany Balancing Rules are used to generate balancing entries for journals that are out of balance by legal entity or primary balancing segment values. Intercompany Balancing Rules are defined in General Ledger and applied across Financials and Projects. Therefore, options A and C are correct. Option B is incorrect because Intercompany Balancing Rules are not used to balance cross-ledger allocation journals.
Option D is incorrect because Intercompany balancing rules in General Ledger do not need to be mapped with the intercompany configuration in each product.
NEW QUESTION # 65
Which two data conversion levels are compatible with the Opening Balance Initialization feature for new reporting or secondary ledgers?
- A. Currency level
- B. Journal level
- C. Subledger level
- D. Adjustment only level
- E. Balance level
Answer: D,E
Explanation:
Opening Balance Initialization is intended for scenarios where a new reporting currency or secondary ledger must begin with initialized balances rather than full transactional history. The feature is compatible with balance-oriented implementations because the objective is to establish beginning balances in the target ledger or reporting currency. Therefore, Balance level is compatible. Adjustment only level is also compatible because the secondary ledger is maintained through manual or adjustment entries rather than a full automatic transaction copy. Subledger level and Journal level involve detailed accounting transfer from the primary ledger or subledgers, which is not the purpose of opening balance initialization. Currency level is not a valid secondary ledger data conversion level in this context. This matches Oracle's ledger architecture for thin secondary ledgers and balance-based reporting currencies.
NEW QUESTION # 66
Users with the General Accountant job role have reported that they are unable to access the UK Ledger. They require read/write access to the full ledger. The accounting configuration completed successfully.
What should you do to allow access to the ledger?
- A. Assign the General Accounting Manager role to those users.
- B. Assign the UK reference set to the user/role combination.
- C. Assign the security context value of UK Ledger to the user/role combination.
- D. Create a data access set that allows access to the UK Ledger.
Answer: D
Explanation:
Data access sets are collections of ledgers that define the data security for users who access General Ledger. Users can only access the ledgers that are assigned to them through data access sets. To allow users with the General Accountant job role to access the UK Ledger, you need to create a data access set that includes the UK Ledger and assign it to the user/role combination. You also need to specify the access privilege for the data access set, which can be Full Ledger, Both Read and Write, or Read Only. In this case, you need to select Both Read and Write to allow read/write access to the full ledger.Reference:
Implement General Ledger
GL_ACCESS_SET_LEDGERS
The Default Data Access Set
Overview of General Ledger Security
NEW QUESTION # 67
Your fiscal authority requires all journals to have a sequential number assigned when the accounting period is closed.
Which sequencing option should you use to achieve gapless sequence numbers for posted journal entries in chronological order?
- A. Ledger Sequencing
- B. Accounting Sequencing
- C. Reporting Sequencing
- D. Document Sequencing
Answer: C
Explanation:
Reporting Sequencing is used when a fiscal authority requires gapless, chronological sequencing for posted journals at period close. Accounting sequences are generally assigned when journals are posted or when subledger accounting is created, but reporting sequences are specifically designed for statutory reporting requirements that demand final gapless ordering after the accounting period is closed.
Document sequencing applies more broadly to source documents and transactions, not this specific General Ledger period-close sequencing requirement. Ledger Sequencing is not the correct Oracle sequencing option for this scenario. Oracle documentation distinguishes accounting sequences from reporting sequences and explains that reporting sequences provide gapless chronological numbering when the General Ledger period is closed.
NEW QUESTION # 68
When working with Essbase, versions of the tree hierarchy as defined in the Fusion are not available in the Essbase balances cube. What should you do to correct this situation?
- A. Redeploy the chart of accounts.
- B. Make sure the tree version was published successfully.
- C. Make sure the tree is active.
- D. Make sure to flatten the rows of the tree version.
Answer: B
NEW QUESTION # 69
You need to integrateFusion Accounting Hubwithexternal source systemsused forBilling. Identify the step that isnot correctwhen implementing this integration.
- A. Analyze external system transactions.
- B. Capture accounting events.
- C. Determine the accounting impact of transactions.
- D. Create the accounting in the source system and then import the journal entries into subledger accounting.
Answer: D
NEW QUESTION # 70
You have been tasked with creating user-defined infolets to monitor key financial metrics. However, you cannot see the option to create infolets in the Infolet repository. What are the two requirements to be able to see the Create option?
- A. You must activate Page Composer.
- B. You must be in a sandbox.
- C. You must create a dashboard.
- D. You must publish a sandbox.
- E. You must define your OTBl analyses.
Answer: A,B
NEW QUESTION # 71
......
Focus on 1Z0-1054-26 All-in-One Exam Guide For Quick Preparation: https://freedumps.testpdf.com/1Z0-1054-26-practice-test.html
